Personal protection

1. The operator should wear protective glasses to protect the eyes, and wear a protective mask when working with the face up.

2. Earplugs should be plugged during long-term operation to reduce the influence of noise.

3. The drill bit is in a hot state after long-term operation, so please pay attention to burn your skin when replacing it.

4. When working, use the side handle and operate with both hands to prevent the arm from being sprained by the reaction force during rotation.

5. Standing on a ladder or working at a height should take measures to fall from a height, and the ladder should be supported by ground personnel.

作业前应注意事项

1. Confirm whether the power supply connected to the site matches the nameplate of the electric hammer. Whether there is a leakage protector connected.

2. The drill bit and the holder should be adapted and installed properly.

3. When drilling walls, ceilings, and floors, check whether there are buried cables or pipes.

4. When working at high places, pay full attention to the safety of objects and pedestrians below, and set up warning signs when necessary.

5. Confirm whether the switch on the electric hammer is off. If the power switch is on, the power tool will turn unexpectedly when the plug is inserted into the power socket, which may cause personal injury.

6. If the work site is far away from the power source and the cable needs to be extended, use a qualified extension cable with sufficient capacity. If the extension cable passes through the pedestrian walkway, it should be elevated or take measures to prevent the cable from being crushed and damaged.